Rigid Industrial Group · Norman, Oklahoma

The biggest company you've never heard of.

Automation, fabrication, electrical and field service expertise, custom-built and delivered from one roof in Oklahoma. We might not be loud, but we are mighty.

PeopleSolutionsInfrastructureA stronger tomorrow

In-house integration

Everything under one roof. Touch a division to see how it connects.

Fabrication Electrical Automation Field Services

Why it matters

No handoffs between companies

Automation, electrical and field services sit next to fabrication and welding, plus emergency repairs, all on one team. Every solution is custom-created for your facility, and when it is ready we deliver it ourselves instead of trusting your components to a third party.

  • FabricationMounts, enclosures, skids, piping and support steel for every other division
  • ElectricalInstalls and maintains what Automation builds and Fabrication frames
  • AutomationPanels delivered, set and integrated by our own electrical and field crews
  • Field ServicesPads, piles, platforms and mounting so equipment lands right the first time

Why the big dogs choose Rigid

Some of the biggest companies in the world trust Rigid with complex, innovative, time-sensitive work.

We don't let them down, and we have some advantages our competition lacks.

Alone in our arena

There simply isn't another company, anywhere, that provides the range of services and expertise Rigid brings to the table.

Everything custom-created

Every solution we craft for you is tailored to your facility, your needs and your expectations.

In-house integration

Automation, electrical and field services alongside comprehensive fabrication and welding, plus emergency repairs, all under one roof.

Rigid delivers. Literally.

No need to outsource delivery of your crucial components to unproven third parties. We'll handle it ourselves.

2025 · Rigid + BHI

A robust and dynamic alliance.

In 2025, Rigid Industrial Group merged with Oklahoma City's most well-known and highly qualified fabrication and welding outfit, B&H Industrial. That unification created Rigid Fabrication, which gives our clients an impressive new spectrum of welding, fabrication, piping and repair services, all seamlessly integrated into Rigid's industrial capabilities.

We keep investing in the people and equipment that serve you, including a new 40,000 square-foot Rigid facility now under construction in Norman.

A Rigid welder at work on a fabricated frameRigid Fabrication · Oklahoma City

Industries we serve

Agricultural operationsChemical processingCleanroomsCommercial buildingsConstruction & infrastructureData centersData processing & transmissionFood & beverageIndustrial facilitiesManufacturingPackaging plantsOil & gasPharmaceuticalPower generationTemperature-sensitive operationsWater & wastewater
A prefabricated module being moved on site by a telehandlerBuilt in the shop, landed on site

Featured · Electrical integration

Hyperscale, finished by hand.

See the prefabricated power, UPS and IT skids Rigid Electrical builds for data centers, and take a complete power skid apart component by component.

Dusk aerial of a data center with the Rigid sign lit on the roofData center, modeled from a real layout

Featured · Field Services

A data center, from pad to power-on.

Watch a data center go up in one continuous shot: underground electrical, foundations, structure, the chiller yards, the electrical rooms with Rigid skids rolling in, the overhead pipe and tray, then the white space lit at night.

Great panels and VFDs. They go above and beyond with quality and cost. I highly recommend them to any business looking for a partner.
Scott H. · Rigid Automation client

Ready to see what Rigid can do for you?

Reach out by phone, contact form or email and we'll be in touch.

Phone405-310-4430

General line for every division, including 24/7 emergency response.

Norman
Rigid Automation
Rigid Field Services
2321 24th Ave SE
Norman, OK 73071
Noble
Rigid Electrical
601 Hamilton Drive
Noble, OK 73068
Oklahoma City
Rigid Fabrication
6421 S Sooner Rd Unit 2
Oklahoma City, OK 73135

Rigid Fabrication

Comprehensive welding, metalwork and Industrial Field Support Services

If you need it, want it or dream it, we can build it. Our team of skilled fabricators and welders is unmatched, and they're standing by around the clock. And it doesn't stop at the shop door: our crews deliver it, install it and support it in the field, so the thing you dreamed up comes to life and keeps running.

At Rigid, we understand how crucial it is to avoid any and all unplanned downtime. That's why Rigid Fabrication supplies end-to-end service to support your industrial operations, from hydronics and piping to custom fabrication and tank builds.

We also provide a wide array of emergency support services for those unexpected times when equipment, structural or other failures start to seriously threaten your bottom line. Our trained, skilled welders and fabricators are standing by 24/7 with mobile rigs and the experience needed to respond any time, day or night, to your emergency welding and maintenance needs.

Rigid + BHI. In 2025, Rigid Industrial Group merged with Oklahoma City's most well-known fabrication and welding outfit, B&H Industrial. That unification created Rigid Fabrication and brought BHI's legacy of fabrication excellence into Rigid's integrated capabilities.

A welder working a long seam on a steel assemblyProduction fabrication & welding

01 · Standard & custom fabrication

Comprehensive services that keep your operation running.

Hydronics

Hydronic systems

Large-scale buildings and operations benefit from the efficiency, reliability and precision of hydronic heating and cooling systems.

Engineering

Design-build engineering

Streamline your project workflow and expedite schedules with a single point of accountability.

Core

Custom fabrication & welding

The backbone of industry worldwide. Tailored, precise and robust solutions for your operation.

Marking

Laser engraving

Permanently etch logos, designs, part numbers and more into metal, wood or plastics.

Vessels

Non-rated tank builds

High-quality, long-lasting tanks built to your precise specifications, plus delivery, installation and tie-ins.

Piping

Process piping

Design, installation and maintenance for process piping systems across a wide variety of industries and applications.

Piping

Gas piping

Years of experience in everything gas piping, from repairs and upgrades to new installations and complex retrofits.

Production

Production fabrication & welding

When repeatability, precision and lead times are crucial, our production team has your back.

From the library

Built from our own drawings.

Four fabrication assemblies from Rigid's engineering library, rendered from the same models and drawings the shop builds from. Drag any model to turn it.

Crossover stairway · drag to turn

Access & platforms

Crossover stairway

Up and over, in one bolt-up.

A crossover that carries crews up and over piping, conveyors or cable tray: two welded stringer assemblies, two handrail assemblies, grating supports, six bar-grating treads and a platform deck, finished in safety-yellow powder coat.

  • Footprint7 ft 4½ in × 3 ft 5¾ in
  • Height30½ in deck, 5 ft 5 in to the top rail
  • BuildWelded stringers and rails, bolted at assembly, welds to AWS D1.1
  • FinishSafety-yellow powder coat, about 870 lb
20 ft control conex · drag to turn

Modular buildings

20 ft control conex

A shipping container, made into a control room.

A standard 20 ft container converted into a conditioned control building: a 3 × 7 ft man door, a through-wall AC unit, cable-entry bulkheads on both sides and a high bulkhead cut into the door end, with HSS framing inside.

  • Shell20 ft standard container, cut and reinforced
  • FramingHSS 2 × 2 and 4 × 4 tube, 10 ga formed bulkheads
  • InteriorTreadplate floor, rock-wool insulation, sheeted walls
  • FinishRigid white
Container AC wall · drag to turn

Container conversions

Container AC wall

The wall that keeps the equipment cool.

An end-wall insert that closes out a container and carries its cooling: a 2 × 2 in tube frame skinned in plate, a mount plate sized for the AC unit, an access hatch and a fan vent assembly on standoffs.

  • SizeAbout 7 ft 8 in wide × 8 ft 7 in tall
  • Frame2 × 2 in tube with plate skins
  • OpeningsAC mount plate, access hatch, fan vent
  • WeightAbout 731 lb
Stainless pump stand · drag to turn

Process equipment

Stainless pump stand

Stainless, built to wash down.

A 304 stainless stand for a process pump: scalloped side and end angles that keep the base light and easy to wash down, with corner angles that locate the pump. Fully welded, edges broken, finished bare.

  • Size41 × 19 × 7 in
  • Material304 stainless steel
  • WeldsFillet welds to AWS D1.1, all edges broken
  • WeightAbout 28 lb

Shop & certifications

The equipment and the paper behind every weld.

  • Fiber laser and CO₂ laser
  • Flat-bed and rotary engraving
  • CNC plasma cutting and forming
  • MIG, TIG and flux core welding
  • Mobile welding rigs
  • AWS and ASME certified welders
  • ASME B31.3 and B31.1 code compliance
  • NFPA 54 compliance
  • International Fuel Gas Code compliance
  • Licensed technicians
Stainless steel process piping with red gear-operated valves, installed overhead beside wire-basket and ladder cable trayStainless steel installation · union pipefitters
Stainless steel installation

Our union pipefitters install stainless steel process piping, valves and supports in place, run overhead and tied in alongside the rest of your plant.

Mechanical Services

Keep it running. Keep it Rigid.

Our Mechanical Services team keeps critical cooling and heating systems running with preventative maintenance, repair and 24/7 emergency service, backed by our mobile welders and field crews.

  • Preventative maintenance programs
  • Chiller & cooling tower service
  • Boiler service & inspections
  • HVAC service & repair
  • Equipment repair & replacement
  • 24/7 emergency service

Emergency welding

Our mobile welders are standing by 24/7 to assist in any emergency and get you back up and running.

Industrial emergency maintenance

Don't let machinery or systems problems result in prolonged downtime. Get Rigid on the line and we'll get you back online.

Facility support services

Get ahead and stay ahead of critical building system issues with integrated, proactive facility support.

Delivery, installation & tie-ins

What we build in the shop, our own crews deliver, set and tie in on your site, then stay to support it.

A chiller plant with large water-cooled chillers on red housekeeping pads, insulated chilled-water piping overhead
Chiller plant, set and piped

Mechanical Services in detail

Service built around your run hours.

Preventative maintenance, repair and 24/7 emergency service that keep critical cooling systems running.

24/7Emergency response
for critical cooling
Coil and VAV piping manifolds with control valves, freshly installed above an air handler

Preventative maintenance programs

Scheduled service built around your equipment and your run hours, so problems are caught on the calendar, not at 2 a.m.

An air-cooled chiller set on a rooftop steel frame with chilled-water piping connected

Chiller & cooling tower service

Inspection, cleaning, water-side and refrigerant-side service that keeps critical cooling at full capacity.

Condensing boilers in a mechanical room with insulated supply and return piping and a stainless flue

Boiler service & inspections

Combustion tuning, safety checks and inspections that keep heating plants efficient and compliant.

Copper hydronic piping and control valves tied into an air handling unit

HVAC service & repair

Rooftop units, air handlers, split systems and controls, diagnosed and repaired by our own technicians.

Two base-mounted pumps with insulated chilled-water piping

Equipment repair & replacement

From a failed component to a full change-out, fabricated, set and connected by one Rigid team.

A valve train with strainer, gate valves and condensate drain on an air handler

24/7 emergency service

When cooling goes down, crews roll around the clock to get critical systems back online.

Industries served

Trusted across a wide scope of industry.

  • Oil & gas
  • Manufacturing
  • Power generation
  • Food & beverage
  • Water & wastewater treatment
  • Chemical processing
  • Agricultural equipment
  • Commercial buildings & institutions

Rigid Electrical

Industrial electrical expertise

Central Oklahoma's trusted industrial electrical contractor. New installations across a wide spectrum of industries, plus thorough maintenance, repairs and upgrades of complex electrical systems.

Industrial operations hinge on reliable, safe and correctly installed and maintained electrical systems. Throughout Oklahoma and the central United States, major operators rely on Rigid Electrical for everything from new installations to repair and maintenance of their systems.

Whatever your industrial setting, we're equipped and trained to handle all electrical work, from oil and gas facilities and factories to food and beverage, manufacturing and utility plants, with a resolute emphasis on safety, compliance and keeping your operations running.

Full spectrum of industrial electrical services

  • New electrical system installations
  • Power distribution & control systems
  • Lighting systems: interior, exterior, industrial
  • Automation panel integration
  • Motor control & wiring
  • 24/7 emergency electrical repair
  • Troubleshooting & diagnostics
  • Preventive & scheduled maintenance
  • System upgrades & retrofitting

Rigid Electrical · Field Service Division

Built Rigid. Wired right.

Licensed electricians on your site, ready to troubleshoot, install and maintain. Commercial and industrial service, scheduled or on short notice.

OK license # 087968

Field service capabilities

Troubleshooting & repair

Fault finding and fast, lasting fixes on site.

Panel & service upgrades

Replacements, subpanels and load increases.

Motors & controls

VFDs, starters, control wiring troubleshooting, start-ups and commissioning.

EV charger installation

Home, fleet and commercial charging stations.

Lighting & LED retrofits

Interior, exterior, parking lots and controls.

Generators & backup power

Installs, transfer switches and scheduled upkeep.

Preventive maintenance

Regular system inspections, infrared scanning, insulation testing, cleaning and worn-part replacement to prevent equipment failure.

Instrumentation

Sensor and transmitter installation and calibration, plus pneumatic signal and supply tubing installation.

Shutdowns & turnarounds

Planned outage crews, start to finish.

Emergency service

Rapid response when the power goes out.

405-310-4430

Emergency rapid response

Sometimes downtime isn't an option. We offer 24/7 emergency response for industrial clients and will rapidly mobilize anywhere in Oklahoma or surrounding states, with unrivaled expertise in electrical hazard mitigation and recovery.

405-310-4430

Compliance & safety

Industrial electricity is extremely powerful and can be deadly. Every installation, repair and upgrade follows NEC, OSHA and NFPA standards, with job site assessments, documented procedures, rigid conduit, and certified, licensed electricians.

Project management & integration

An in-house project management team collaborates directly with our engineering, automation and fabrication teams. We handle vendor and subcontractor coordination, scheduling and rigorous cost control, from concept to completion.

Facility support services

Inspection, testing and maintenance, building systems management, equipment repairs and upgrades, and emergency facility support that minimizes downtime and extends equipment life.

Why the big dogs choose Rigid Electrical

Advantages our competition lacks.

Proven field expertise

Years of field-proven success and safety.

Scalable

Comprehensive solutions for any size facility.

Long-term relationships

Clients come back to Rigid year after year, job after job.

Integration

Seamless collaboration with the Rigid Automation and Field divisions.

Industries served

  • Oil & gas facilities
  • Manufacturing & industrial plants
  • Power generation stations
  • Water treatment facilities
  • Food processing plants
  • Data centers

Rigid Automation

Industrial control panel design, manufacture & delivery

UL-listed industrial control panels designed, fabricated and assembled in Norman for a wide variety of manufacturing and industrial applications. Around the world, wherever operations rely on precise, reliable automated controls, you're likely to find a panel built by Rigid.

Our skilled technicians design, construct and test each panel to ensure reliability, compliance and safe operation in diverse industrial environments. From programmable logic controllers and motor control center panels to operator stations and specialized automation enclosures, we've designed and built it all. Even when they don't carry our name, it's only because many are white-labeled for other companies.

Whether you need new panel design, development and fabrication, or have a design you need produced, Rigid is standing by to scale our production to your needs. For many years we have specialized in fabrication and assembly of UL508A and UL698A listed panels, and we excel in even the most high-risk, highly regulated environments.

Panel shop capabilities

  • Turnkey fabrication & testing
  • Control panel design & engineering
  • Custom-made UL508A / UL698A panels
  • VFD (variable frequency drive) panels
  • SCADA + PLC integration
  • Remote monitoring & data logging
  • Explosion-proof / hazardous area panels
  • MCC panels and operator stations

Unrivaled customization

Our state-of-the-art vertical CNC routers provide a level of customization that was previously impossible for industrial control panel applications.

Engineering + compliance

Every panel is built to the most stringent client and compliance standards. Rigid carries ISO and UL certifications and provides comprehensive documentation and schematics with every build.

Tailored delivery & setup

If you desire, we can handle delivery and setup of any panel, anywhere in the world, with our own electrical and field teams.

Fast lead times

A U.S.-based team in the heart of the country, committed to expediting timelines through streamlined operational processes.

Inside the Norman panel shop

Real panels, built on our floor.

Every photo here is from our own shop: backplates staged and railed, panels wired and dressed, enclosures cut on our vertical CNC machining centers, and finished cabinets crated to ship.

A row of control panel backplates wired and dressed in white wire duct, with breakers, relays and terminal blocks
Panels wired and dressed
Two large finished white control enclosures on pallets on the shop floor
Finished enclosures, ready to ship
A long bench of backplates with DIN rail and wire duct mounted, staged for wiring
Backplates staged for build
Two vertical CNC machining centers used to cut and drill control enclosures
Vertical CNC machining for enclosure cutouts

Design-build engineering

One team, one vision, one point of accountability.

Consolidating design and construction under one roof saves time, resources and cost, and gives you the assurance that the design is not only feasible but achievable within your budget. Step through how it works.

01

Pre-construction planning

Feasibility studies, cost evaluations, timelines and a roadmap for every project phase.

Industries served

Across the world, Rigid's automation systems are trusted by leaders.

  • Oil & gas facilities
  • Data processing & transmission
  • Manufacturing plants
  • Water & wastewater treatment
  • Power generation sites
  • Chemical processing environments

Data centers, from pad to power-on.

Mission-critical infrastructure, built in the field

Rigid Field Services is the group's newest division, and data centers are its focus: the graded pad, the foundations and duct banks, the equipment pads, the electrical construction and the final set of gear, delivered by crews used to remote sites and tight specifications. Below, a data center goes up phase by phase, then the camera walks it end to end, with every system Rigid builds labeled along the way. It is modeled from a real site layout, with Rigid gear placed where the drawings put it.

Leadership

The people running the field.

Dallas Metcalf

Dallas Metcalf

Vice President of Operations

Driving operational excellence, project execution and continued growth.

Michael Bradley

Michael Bradley

Director of Electrical Construction

Leading our electrical construction operations with a focus on safety, quality, schedule and execution.

Mission critical · People · Real impact

Built to perform. Built to grow.

Every operator and field crew is trained, licensed and vetted. Safety comes first and turnaround comes second, and the mounts, hardware and components we need are fabricated in-house.

The build, then a walk through it

One data center. Under the jargon, it is a building.

A 1,200 by 400 ft hall, three stories tall, modeled from a real data center layout and built the way Rigid builds it. The film opens high over the site and circles the plant as it goes up: underground electrical, foundations and pads, steel and envelope, the yards and the front entrance. Then it drops to the front door, where the interior is only starting, and walks the four halls as they build out one system at a time: hall 1 with the chilled-water mains and row manifolds hung and nothing else in it; the electrical rooms as the first Rigid RMU and IT skids roll in and are set; hall 2 as the cable tray and busway go up and the lights come on; hall 3 as the fan walls, their piping and the CDUs arrive; and hall 4 full and running, racked, contained and commissioned. Out the east door at night. Each piece is labeled as you pass it. Power in, cooling around, computers in rows.

One continuous film, 2:00. Built from a real layout; no customer, address or part numbers shown. Rigid skids modeled from our own layouts, placed per the plan; original score; phase captions, labels and progress bar are in the video.

Phase by phase

What each phase takes, and the range we build in.

Rigid has been building in the field for years, from oilfield civil work, welding and fabrication to mission-critical power. One group covers the steel, the electrical, the pipe and the controls, so every phase below is ours to deliver. Every figure here comes from equipment we have designed, built or installed.

Pipe3 – 20 in

Welded and pressure-tested, from 20 in mains to 3 in CDU drops.

Cable and hose tray12 – 36 in

Runs, tees and risers, over the rack rows and along the skids.

Transformers30 kVA – 5.5 MVA

From small dry-type units to 5,500 kVA in bolt-together enclosures, and oil-cooled over containment basins.

UPS5 – 1,500 kVA

From a controls UPS up to double-conversion IT power trains with battery lineups.

Skids and containers19 – 40 ft

W10×39 fabricated bases and 40 ft high-cube containers, built, wired and set.

Control panelsUL508A · UL698A

Listed panels designed, built and tested in our own shop.

  1. 01Electrical · Field Services
    Site and underground

    The pad is graded and staked, the roads go in, and the duct banks are trenched and stubbed up for every electrical room.

    Site work
    Pad site development and civil work, where Rigid started
    Service
    Medium-voltage feeders from the utility ring to each electrical room
    Raceway
    Rigid steel conduit with 2 in threaded fittings, up to 6 in raceway
    Rigid Electrical lays out the feeders while the pad is still dirt.
  2. 02Fabrication
    Foundations and pads

    Column footings, the slab and the chiller pads, set to the gear that is coming.

    Skid footprints
    About 19 × 10 ft up to 40 × 7 ft
    Base steel
    W10×39 fabricated skid bases
    Containment
    Fabricated basins under oil-cooled transformers
    Pads poured to our own skid drawings, so the sets land first time.
  3. 03Fabrication
    Structure and envelope

    Steel, roof and wall panels: the 1,200 by 400 ft hall and the admin block at the front take shape.

    Platforms
    Bar-grating decks and platforms with hoist rings
    Support steel
    Strut H-frames, brackets and secondary steel
    Enclosures
    Bolt-together equipment enclosures and 40 ft high-cube containers
    Support steel, platforms and secondary steel from Rigid Fabrication.
  4. 04Field Services
    Yard pipe and front entrance

    Chillers on their pads and the chilled-water mains along the wall, then the canopy, glass and plaza at the front door.

    Pipe
    3 in to 20 in, mains welded continuous
    Testing
    Pressure-tested in place
    Gas
    Gas piping repairs, upgrades and new installs
    Pipefitters weld the mains continuous and hang them from the top.
  5. 05Field Services
    Lobby and hall 1: pipe first

    In the front door with the interior just starting, then down hall 1 as the 20-inch mains and the 6-inch row manifolds are hung. No racks yet.

    Mains
    20 in supply and return, hung from secondary steel
    Row manifolds
    6 in over every rack row, before the racks exist
    Testing
    Pressure-tested in place
    Pipe goes in first, while the hall is still empty.
  6. 06Electrical · Fabrication
    Electrical rooms: the first gear

    Rigid RMU, IT and mech skids roll in through the equipment door and are set; tray hung, secondaries pulled and landed.

    Transformers
    30 kVA dry-type to 5,500 kVA; 5.4 MVA oil-cooled
    UPS
    5 kVA for controls to 1,500 kVA double-conversion
    Gear
    Ring main units, switchboards, panelboards and load centers
    Voltage
    Medium voltage in; 480 V and 240/120 V out
    Rigid RMU, IT and mech skids, landed and labeled by licensed electricians.
  7. 07Electrical
    Hall 2: tray and busway

    Pipe already in. Cable tray and busway go up over every row, the spine busway runs the hall, and the lights come on.

    Cable tray
    12 in and 24 in runs with tees, 36 in risers
    Row power
    Busway hung over every rack row
    Branch circuits
    Lighting and receptacles on EMT
    Row busway and tray hung before the first rack arrives.
  8. 08Fabrication · Field Services
    Hall 3: fan walls and CDUs

    Pipe, tray and busway in. The CRAH fan walls roll in and are piped, then the CDUs and their drops; the first racks arrive.

    Branches
    6 in to every fan wall unit, with valve and flex
    Rows
    3 in CDU drops off the row manifolds
    Hose tray
    12 in and 24 in cable and hose tray running the length of the skids
    Hydronics and manifolds from Fabrication, fitted and pressure-tested in place.
  9. 09Automation
    Hall 4: full and running

    Every row racked and contained, LEDs green, every breaker, relay and valve tested, then out the east door at dusk.

    Panels
    UL508A and UL698A listed, built and tested in house
    Motor control
    NEMA size 1 starters in 3R enclosures, variable frequency drives
    Controls
    BMS panels, metering and site-system tie-ins
    Testing
    Every breaker, relay and valve tested before turnover
    Controls and metering tied into the site systems by Rigid Automation.
On site.On time.On point.

Experience drives execution. Rigid Field Services brings mechanical construction, electrical construction and mission-critical infrastructure together under one division, backed by the group's fabrication shop, panel shop and electrical crews.

Mission-critical infrastructure
Mechanical construction
Electrical construction
Growing together

What we do in the field

All the way from ground prep to final set.

Mission-critical infrastructure

Pads, platforms, foundations, duct banks and electrical construction for data centers and other facilities that cannot go dark.

Electrical construction

Field electrical construction led from within the group, with Rigid Electrical's licensed crews and Rigid Automation's panels behind it.

Concrete pads

Prefabricated pads or poured-in-place slabs for equipment mounting and structural support.

Helical installation

Torque-driven helical piles give high-load support for platforms, towers and equipment foundations without traditional concrete footers.

Excavation and hydrovac

Heavy-equipment trenching and grading, plus safe, non-destructive hydrovac trenching near utility lines, telecom and sensitive infrastructure.

Platform mounting

Steel platform assembly and installation over concrete or helical foundations, for pump skids, electrical equipment and telecom cabinets.

Industries served

Where the trucks go.

Data centers

Ground infrastructure, pads, duct banks and electrical construction.

Oil & gas

All aspects, including pad site development.

Utilities

Infrastructure.

Midstream operations

Infrastructure.

Prefabricated hyperscale infrastructure

Hyperscale, finished by hand.

Prefabricated power, IT and energy skids for the data centers that run the cloud. Engineered, fabricated, wired and tested under one roof, then shipped ready to land. The models on this page are built from released assemblies in our own engineering library.

IT A-side skid · drag to turn

The idea

A data center is a factory for compute. We build its power train like a product.

Instead of assembling switchgear, UPS and distribution on a crowded site, Rigid builds the complete power train on a fabricated steel skid. Every skid is engineered once as a numbered top-level assembly, built in series from its released bill of materials, witness-tested, and shipped as a single lift.

5.5MVA

largest transformer landed on one skid, enclosure and all

40ft

UPS, batteries, switchboard and tray, delivered as one lift

100%

witness-tested in the shop before it ships

The lineup

Eight assemblies, straight from the library.

Each model below follows a top-level assembly in Rigid's engineering library: the same bill of materials and footprint the shop builds from, simplified for the web. Drag any model to turn it.

IT RMU skid · drag to turn

IT RMU skid

Medium voltage, landed in one piece.

The IT side's utility entry on one weldment: two ring main units loop the site onto the utility ring, and a protected feeder hands power to a 3,500 kVA transformer inside a bolt-together enclosure built in our own shop. The RMU control panel rides a narrow cable H-frame, so terminations, relaying and grounding are finished before the skid leaves.

  • Transformer3,500 kVA, in a bolt-together enclosure
  • SwitchingTwo ring main units, one on an adapter mini skid
  • ControlsRMU control panel on a cable H-frame
  • BaseRMU skid weldment, about 19 × 10 ft, eight 6-bolt lugs
Mechanical RMU skid · drag to turn

Mechanical RMU skid

The same skid, sized for the chillers.

A sister to the IT RMU skid on the same weldment, lugs and panel mounts, with a larger 5,500 kVA transformer for the mechanical plant and a building management panel on its own mount. Sharing the base between the two means one set of shop drawings, one rigging plan and one set of lessons learned.

  • Transformer5,500 kVA, in a bolt-together enclosure
  • SwitchingTwo ring main units
  • ControlsRMU panel and BMS panel on dedicated mounts
  • BaseShared RMU skid weldment, about 19 × 10 ft
IT A-side skid · drag to turn

IT A-side skid

Forty feet of ride-through, as one lift.

The A side of an IT power train on a single W10×39 fabricated base: a 1,500 kVA UPS, eleven lithium-ion battery cabinets and the A-side switchboard, with 12 and 24 inch cable and hose tray running the length of the skid and teeing off to the row. Three universal UPS mini skids let the gear land square without field shimming. A mirror-image B-side skid completes the pair.

  • UPS1,500 kVA double-conversion
  • BatteriesEleven Li-ion cabinets on mini skids
  • DistributionA-side switchboard, 12 and 24 in cable tray with tee
  • BaseW10×39 skid, about 40 × 7 ft, ten 4-bolt lugs
Mechanical A-side skid · drag to turn

Mechanical A-side skid

Low-voltage switchgear, panels and UPS on one frame.

The mechanical plant's A-side power: six sections of low-voltage switchgear, a UPS with its maintenance bypass cabinet, three battery cabinets, and three panelboards on H-frame mounts. A third panel was added late without touching the base, which is the point of building on a standard assembly.

  • SwitchgearSix LV sections in three configurations
  • UPSUPS with maintenance bypass cabinet
  • PanelsThree panelboards on H-frames
  • BaseW10×39 skid, about 38 × 5 ft, ten 4-bolt lugs
PCS skid · drag to turn

PCS skid

Storage meets the grid on steel.

A power conversion skid for battery storage: two power conversion cabinets on their own mini skids, a 5.4 MVA oil-cooled transformer over a fabricated containment basin, and a 36 inch tray riser carrying the DC and AC runs. The structure is W18×35 long beams with an HSS6×6 interior beam, decked in bar grating, with horizontal H-frame beams for the cable landing.

  • ConversionTwo PCS cabinets on mini skids
  • Transformer5.4 MVA oil-cooled, containment basin with funnel
  • StructureW18×35 beams, HSS6×6 interior, bar grating deck
  • BaseAbout 21 × 12 ft
ILA LD container · drag to turn

ILA LD container

A fiber amplifier site in a forty-foot box.

In-line amplifier sites sit every 50 to 60 miles along a long-haul fiber route, and if one stalls the whole route stalls. This one is a 40 foot high-cube container fitted out as a kit: bay and cable racks, six 3-ton mini-split condensers on fabricated brackets, power distribution, 6 inch raceway, lighting and receptacle circuits on EMT, and a four-sheet electrical drawing set, so the container arrives on site with the power and fiber entries finished.

  • Shell40 ft high-cube container, side and end doors
  • CoolingSix 36k BTU mini splits, N+1
  • PowerPower distribution unit, surface lighting panel
  • Raceway6 in raceway, EMT branch circuits, access ports
Nano ILA power module · drag to turn

Nano ILA power module

The smallest site on the route.

A power module for the nano amplifier sites between the big ones: a primary cabinet, panelboard and fiber enclosure on strut H-frames, rigid steel conduit with 2 inch threaded fittings, a grounding bar and a bar-grating deck, all on a skid with five forged hoist rings. A tilted solar light on its own stand means the site is lit without a utility drop.

  • GearPrimary cabinet, panelboard, fiber enclosure
  • RacewayRigid steel conduit, strut-mounted
  • LightingSolar light stand, tilted 30°
  • BaseAbout 8.5 × 6 ft, bar grating, five hoist rings
Remote power skid · drag to turn

Remote power skid

A pump station's whole electrical room, on a pallet.

Everything a remote pump or well site needs to run, pre-wired on an H-frame weldment: a 480 V panelboard, a 240/120 V load center, a 30 kVA dry-type transformer, a NEMA size 1 3R motor starter, a variable frequency drive and a 5 kVA UPS to keep the controls alive. Set it, land the feeder and the motor leads, and the site is live.

  • Distribution480 V panelboard, 240/120 V load center
  • Transformer30 kVA dry-type
  • Motor controlVFD and NEMA size 1 3R starter
  • Backup5 kVA UPS for controls

Anatomy of a power skid

Scroll to take it apart.

Nine components, in the order they go on. Keep scrolling and the skid comes apart in your hands.

Assembled0 / 9

One lift, nine systems

Utility power comes in at medium voltage on the left and leaves as conditioned 480 V on the right. Everything between is built, wired and tested on one frame.

One roof

From drawing to dock, without a handoff.

Four crafts that usually belong to four contractors sit on one floor. The sequence below is the whole supply chain.

Rigid Industrial Group integration floor with switchgear and UPS skids in a line
Integration floorLineups land on skids, get bused, trayed and terminated in place.
Rigid Industrial Group integration floor, transformer enclosures and distribution on the right
Test and shipWitness-tested on the floor, then loaded as one lift with rigging ready.
01

Engineer

From your single-line to a numbered top-level assembly with its own drawings, BOM and revision history, reviewed with your engineer of record before steel is cut.

Rigid Industrial Group
02

Fabricate

Wide-flange frames cut, welded, blasted and coated in our own bays. Lugs, mini skids and deck included.

Rigid Fabrication
03

Integrate

Gear lands on the frame. Bus, conduit, tray, cabling and controls are built and terminated in place.

Rigid Electrical · Rigid Automation
04

Test and ship

Witness-tested with your team, documented, and loaded as one lift with rigging ready.

Rigid Field Services

Tech specs

IT A-side skid, on paper.

The assembly turning in the banner above. Every skid is engineered to the project's single-line, site and schedule; this is what one looks like on paper.

Assembly
IT A-side skidWith a mirror-image B-side skid
UPS
1,500 kVA UPSDouble-conversion, on a universal UPS mini skid
Batteries
Eleven lithium-ion battery cabinetsOn their own mini skids
Switchboard
A-side switchboard, bus-connectedFactory-terminated, labeled to the project schedule
Tray
12 and 24 in cable and hose trayFull-length run with a 24 in horizontal tee to the row
Base
Fabricated W10×39 skid, about 40 × 7 ftThree universal UPS mini skids, ten 4-bolt lifting lugs on ½ in plate
Documentation
Assembly drawing, CAD model, release packageEvery revision, change order and drawing kept in the library
Controls
EPMS and BMS integrationRevenue-grade metering per feeder
Testing
Factory witness test with documentation package

Models are built from Rigid's released top-level assemblies and simplified for the web; final specifications, listings and dimensions are defined per project. Customer names and site locations are omitted.

Start a project

Let's build your next megawatt.

Bring us a single-line and a date. We'll bring the skid.

Industries we serve

Wide-ranging expertise and capabilities

From the energy industry and power generation to cleanrooms, water treatment and manufacturing, our teams and service lines have proven themselves to be as safe and precise as they are durable and effective.

Oil & gas

The energy industry has trusted Rigid's 24/7 emergency welding and fabrication support, customized control panels and much more for years, from pad site development to midstream infrastructure.

All four divisions

Data centers

Air-free, clean hydronic heating and cooling plus industrial electrical expertise, prefabricated power and IT skids, and ground infrastructure for data centers and cleanrooms.

Electrical · Fabrication · Field

Manufacturing

The ideal partner for any manufacturing operation, with support and solutions for nearly every aspect of your industry, from control panels to process piping.

All four divisions

Power generation

Utilities across Oklahoma rely on Rigid's 24/7 emergency welding and fabrication support, customized control panels, process piping and more.

All four divisions

Water & wastewater

Treatment plants can't afford downtime. Emergency services, facility support, customized control panels, piping and more.

All four divisions

Food & beverage

A wide variety of industrial support solutions for foodservice, food and beverage manufacturing, assembly lines and more.

Electrical · Fabrication

Chemical processing

Precise, safe and strenuously exacting services for chemical processing plants and related industries.

Automation · Fabrication

Data processing & transmission

Trusted by tech giants to create tailored control panel solutions for high-performance and remote data transmission facilities.

Automation

Agricultural operations

Custom fabrication and gas piping expertise to support heavy equipment manufacture, farm and other agricultural environments.

Fabrication

Cleanrooms & industrial facilities

Sensitive electronics need HVAC without moving air. Hydronics are the ideal solution, for cleanrooms and the largest industrial facilities alike.

Fabrication

Commercial buildings & institutions

Equipment and expertise for hospitals, healthcare complexes, municipal buildings, schools, universities and skyscrapers.

Fabrication · Facility support

Pharmaceutical & packaging

Process piping that meets rigorous pharmaceutical standards, and seamless, intelligent piping for packaging plants.

Fabrication

About Rigid Industrial Group

The biggest company you've never heard of

Rigid Industrial Group began many years ago as Rigid Oilfield Services, a small company focused on civil work and oilfield needs in western Oklahoma. We assisted oil and production companies of all sizes with everything from water transfers and rental equipment to frac ponds. Over the years we decided to liberate ourselves from dependence on the oil industry and its notorious ups and downs, expanded into Rigid Automation, and began manufacturing custom-built industrial control panels.

Since then we've never stopped growing, adding Rigid Field Services, Rigid Electrical, and most recently Rigid Fabrication. We continuously improve and update our equipment to better serve you, investing in expansions and powerful mergers with the best companies in the industry to consolidate and streamline our offerings. A new 40,000 square-foot Rigid facility is now under construction in Norman.

Two Rigid team members reviewing work on a tablet in the shopNorman, Oklahoma

Leadership

Rigid Industrial Group leadership.

Kevin Metheny

Rigid owner

James Beedle

BHI owner

Patricia Beedle

BHI project manager

Dallas Metcalf

Vice President of Operations · Field Services

Michael Bradley

Director of Electrical Construction · Field Services

Facility & equipment

What's on the floor.

  • Custom UL508A / UL698A panels
  • SCADA + PLC integration
  • VFD panels
  • Fiber laser and CO₂ laser
  • Flat-bed & rotary engraving
  • CNC plasma cutting & forming
  • MIG, TIG and flux core welding
  • Mobile welding rigs
  • Vertical CNC routers

Safety & certifications

The standards we work to.

  • NEC compliance
  • OSHA standards
  • NFPA standards, including NFPA 54
  • Certified & licensed electricians
  • Licensed technicians
  • AWS & ASME certified welders
  • ASME B31.3 & B31.1 code compliance
  • International Fuel Gas Code compliance
  • ISO and UL certifications

Careers

Work with us.

From fabricators, welders and electricians to technicians, designers and front office staff, we're always looking for talented, hardworking and skilled people to add to our growing team.

Build with Rigid

Four trades. One team. Room to grow.

From fabricators, welders and electricians to technicians, designers and front office staff, we're always looking for talented, hardworking and skilled people to add to our growing team.

Where you'd work

Four divisions, three shops, one crew.

Every division sits next to the others, so the work you learn in one carries into the next.

Oklahoma City

Fabrication

Welders and fabricators. MIG, TIG and flux core on skids, tanks, pipe and structural steel, in the shop and on mobile rigs.

Noble

Electrical

Journeymen, apprentices and service technicians. Industrial installations, maintenance and repair, start to finish.

Norman

Automation

Panel builders and QA/QC. UL508A and UL698A panels designed, built and tested in our own shop.

Norman

Field Services

Field crews and project managers. Data center and mission-critical construction, set and connected on site.

Apply

Tell us about you.

Pick the position, add your experience and licenses, and send. It goes straight to our hiring team.

Sending opens your email app with your application filled in, addressed to our hiring team. Attach your résumé there before you send.

How can we help?

Whether you need emergency welding and repairs, want our expertise in designing industrial control panels, or would like help with large-scale industrial systems like hydronics, facility support or piping, Rigid is ready to roll.

Path one

Request a quote

Tell us what you need built, installed or repaired and where. A project manager from the right division replies within one business day.

Sending opens your email app with everything filled in, addressed to the lead for the division you picked. Attach drawings or specs there before you send.

Path two

Schedule a consultation

Thirty minutes with the right people: control panel design, power distribution, prefab skids, hydronics, data center construction. In person in Norman, Noble or Oklahoma City, on site, or on a call.

Sending opens your email app with your request filled in, addressed to the right people for your topic. We confirm a time by reply.

Our facilities

Four facilities, seventeen miles.

From southeast Oklahoma City to Noble, every Rigid shop is a short drive from the next: more than 240,000 square feet under roof. Plans below are traced from satellite imagery and drawn to the same scale.

Oklahoma CityFabrication0 mi Oklahoma CityLeased facility1.3 mi NormanAutomation, Field Services14.8 mi NobleElectrical17.1 mi
S SOONER RDN100 FT
Oklahoma City

Rigid Fabrication

≈47,000sq ft

Four shop buildings around one fenced steel yard.

6421 S Sooner Rd Unit 2
Oklahoma City, OK 73135
Directions
MID AMERICA BLVD70,000 SQ FT LEASEDN100 FT
Oklahoma City

Rigid leased facility

70,000sq ft

Leased space a mile and a quarter from the fabrication shop.

8100 Mid America Blvd
Oklahoma City, OK 73135
Directions
24TH AVE SEE IMHOFF RD2321 24TH AVE SEN
Norman

Rigid Automation · Rigid Field Services

HQHeadquarters

Headquarters, with the Automation panel shop and Field Services.

2321 24th Ave SE
Norman, OK 73071
Directions
HAMILTON DRN100 FT
Noble

Rigid Electrical

≈123,000sq ft

Three connected buildings on Hamilton Drive.

601 Hamilton Drive
Noble, OK 73068
Directions
Phone · every facility405-310-4430

One number for every division, including 24/7 rapid-response crews that can be on site within hours for critical repairs and shutdown support.

Our service area

Oklahoma first. Nationwide when you need us.

Though Rigid has provided services for major corporations and industries across the world, we most commonly serve the states nearest our Norman headquarters: Oklahoma, Texas, Kansas, Arkansas, New Mexico, Colorado, Missouri, Louisiana, Minnesota and Michigan. Reach out directly to find out how we can best and most expeditiously serve you.

Privacy policy

Last Updated: 15th October 2025

RIGID Industrial Group (“we,” “us,” or “our”) values your privacy and is committed to protecting your personal information. This Privacy Policy describes how we collect, use, disclose, and safeguard your information when you visit our website, https://rigid-ig.com. By using our Site, you agree to the collection and use of information in accordance with this policy.

1. Information We Collect

We collect information that may personally identify you when you:

  • Contact us through the Site
  • Request information or consultation
  • Engage in transactions or use interactive features on the Site

Types of information we may collect include:

  • Personal Information: This includes your name, email address, phone number, and any other information you voluntarily provide.
  • Usage Data: We may collect information on how our Site is accessed and used. This data may include your IP address, browser type, device type, pages visited, and time spent on each page.

2. How We Use Your Information

RIGID Industrial Group uses your information to:

  • Respond to inquiries and provide requested services or information
  • Improve our Site and the services we offer
  • Analyze usage trends to enhance user experience
  • Communicate with you about updates, promotions, or other relevant content related to our services (you may opt out of these communications at any time)

3. Sharing Your Information

We may share your information in limited circumstances, such as:

  • With Service Providers: We may share your information with third-party service providers to perform certain business-related functions on our behalf, such as data analysis, customer service, and marketing assistance. These providers are obligated to protect your information and only use it for the services they provide.
  • For Legal Purposes: We may disclose your information to comply with legal obligations, such as in response to court orders or legal processes, or to protect our rights, property, and safety.

4. Cookies and Tracking Technologies

RIGID Industrial Group uses cookies and similar tracking technologies to monitor activity on our Site and store certain information. These cookies help us improve the user experience by analyzing web traffic and customizing content based on your interests.

You may choose to disable cookies in your browser settings, though some Site features may not function as intended if cookies are disabled.

5. Data Security

We implement reasonable security measures to protect your information from unauthorized access, disclosure, or alteration. However, please be aware that no data transmission over the internet is entirely secure, and we cannot guarantee the absolute security of your information.

6. Your Rights

Depending on your location, you may have the right to:

  • Access, update, or delete personal information we hold about you
  • Object to or restrict our processing of your data
  • Withdraw consent where we rely on consent for data processing

To exercise these rights, please contact us at https://rigid-ig.com

7. Third-Party Links

Our Site may contain links to external sites that are not operated by us. We have no control over these third-party sites and cannot be held responsible for their privacy practices. We encourage you to review the privacy policies of any site you visit.

8. Changes to This Privacy Policy

RIGID Industrial Group may update this Privacy Policy periodically to reflect changes in our practices or legal requirements. Any changes will be posted on this page, and the updated date will be revised accordingly. We recommend reviewing this policy regularly to stay informed about how we are protecting your information.

9. Contact Us

If you have any questions about this Privacy Policy or how your data is handled, please contact us at:

General 405-310-4430